Panic Bar & Exit Device Installation Calgary

At Super G&R, our technicians deal with exit hardware every week. A fire exit must open with one push. Panic bar & exit device installation Calgary keeps the door from sticking. Still, many offices only notice their exit hardware when someone leans on the bar and nothing happens. Therefore, we treat every door as a life-safety item, not just a lock. For example, a single bad latch on a school gym door can slow an entire evacuation.

What Panic Bars & Exit Devices Do

Super G&R does panic bar & exit device installation Calgary for shops, schools, and offices. A panic bar, or crash bar, is the horizontal push bar on the inside of a door that releases the latch when someone pushes it. An exit device is the broader term for the whole assembly, including the latch, the bolts, and the trim. For example, a rim device mounts on the face of the door, while a mortise version sits inside the door’s edge. Occupant load and the building’s occupancy type decide which style the local authority having jurisdiction (AHJ) expects, so we check both before we quote. As a result, the right choice depends on the door itself, not just the building.

Installation & Replacement

Old or loose exit hardware can fail during an emergency. Panic bar & exit device installation Calgary replaces it with parts that meet code. Most replacement calls start with a device that has worn out after years of daily use. However, a new device only works if the frame, the door, and the closer are right too. As a result, we check the door’s fire rating label before we order a single part. Then, we confirm the strike location and the frame clearance, because a mismatch there is where many installs go wrong. For example, an older door may no longer match the new latch height. We measure it on site first. Standards like UL 305 and the Life Safety Code (NFPA 101) set the rules the AHJ will review, and we build our work around them.

Repair & Adjustment

Sticking, latching, and alignment problems are the most common reasons people across Calgary call us about a crash bar. A bar that feels stiff usually has a worn latch mechanism, a sagging door, or a strike that has shifted. Adjusting the strike, the closer, or the rod alignment often solves it, but the real test is push force. Our technicians check each part in turn, since a loose screw at the latch can usually cause the same symptoms as a bad closer. Each panic bar & exit device installation Calgary job ends with a push test on every door. Moreover, Super G&R records the push force on each door, so the building manager gets a clear sign-off. Finally, we ask the staff to open the door themselves, because that test tells us more than any gauge can.

      EXCELLENT  
   Based on 297 reviews 
    
 
 
 
   
 
 
       Posted on Google  
   
   Jeff Langridge 
 
 
 
 Trustindex verifies that the original source of the review is Google. Greg hooked me up solid on a new keyfob for my fusion, and on a sunday to boot. Top notch service! Definitely recommend.
  
 
      Posted on Google  
   
   MJCB 
 
 
 
 Trustindex verifies that the original source of the review is Google. I called them to unlock my truck, and everything went smoothly and quickly. Oleksi was very friendly and did a great job. The price was also very reasonable. I’m a satisfied customer and will definitely recommend them
  
 
      Posted on Google  
   
   A rage 
 
 
 
 Trustindex verifies that the original source of the review is Google. Had a great experience with them very professional and fast. fixed my issue no problem
  
 
      Posted on Google  
   
   Lalnunpuia Bochung 
 
 
 
 Trustindex verifies that the original source of the review is Google. It only takes 25 minutes programming and key cut for my 2018 Honda CRV today. Thank you very much for your excellent work.
  
 
      Posted on Google  
   
   Vincent Lui 
 
 
 
 Trustindex verifies that the original source of the review is Google. We had a little problem. But Steven quickly came and sorted it out with great customer service. Also had Oleksii was able to help us out unlock another car in the past.
  
 
      Posted on Google  
   
   WIB FOODS 
 
 
 
 Trustindex verifies that the original source of the review is Google. Start to finish these guys are great, very personable, fair pricing, flexible, clarifies the situation ant hand and willing to accommodate as needed. 5 * for sure.
Great work Oleksii!
  
 
      Posted on Google  
   
   Issa Fard 
 
 
 
 Trustindex verifies that the original source of the review is Google. I had my car door opened, key cut and programmed for an amazing price. But I had an even better experience with Oleksii, great kid and great company😁

Panic Bar & Exit Device Installation for Calgary Businesses

Panic bar and exit device installation
Panic bar repair and adjustment
Exit device replacement
Rim device and mortise device installation
Fire exit hardware installation
Door closer and alignment adjustment
Electric strike and maglock installation
Keypad and card reader setup
Access control system upgrades
Keyless entry for commercial doors
Battery and power supply troubleshooting for electric locks
Access control integration with exit devices
Commercial door lock security assessments
Emergency exit door repair and support

Pairing Exit Devices With Access Control

Many offices want card access on the front door, but they still need free egress from the inside. Here, the exit device and the access control system have to work together, not fight each other. For example, a fail-safe electric strike unlocks when power drops, so the exit device can still open the door during an outage. On the other hand, a fail-secure strike stays locked during an outage, which is why the wiring and the fire alarm tie-in need a careful look. Keypads, key cards, and card readers belong on the secure side, and they should never block the exit path. Still, this setup depends on the fire alarm and the local AHJ, so we review the plan before we wire anything. You can read more about our access control systems for Calgary businesses.

Serving the Greater Calgary Area

Locksmith Services Near You

Locksmith NW

Locksmith NE

Locksmith SW

Locksmith SE

Smart Lock Frequently Asked Questions & Security Tips

What is the difference between a panic bar and an exit device?

The panic bar is the part you push on, while the exit device is the full hardware set behind it. Most importantly, both have to match the door type and the fire rating.

Can you install exit devices on our existing commercial doors?

Often, yes, but the answer depends on the door material, its thickness, and its fire rating. Hollow metal, wood, and glass doors each need different mounting, so we measure before we quote. We also check the closer and frame before we order anything. We cannot promise code approval for every door, since the AHJ makes that call.

Can an exit device work with our keypad or access control?

Yes, it can, as long as the wiring and the lock type match the plan. Keypads and card readers handle entry, whereas the exit device handles egress from the inside. Most setups use a fail-safe or fail-secure strike, and that choice changes how the door behaves in a power failure. Ask us to walk through the options before we touch the wiring. Therefore, Super G&R maps the door, the power supply, and the alarm before we quote.

In short, Super G&R keeps your exit hardware ready for the day it matters most. If your doors need attention, start with our commercial locksmith services or our door lock repair page.